Asante Technologies IC35516G, IC35516T manual Features, Snmp Rmon

FEATURES

Single-Chip:

Layer 2/3 Switch/Router:

Extensible Platform:

IP Routing:

Filtering Routing Information: (Using ACL)

Class of Service/QoS

Traffic Filtering & Firewall:

Multi-Services for Multimedia:

Virtual LANs:

Addresses

Security

Spanning Tree

Jumbo Packets

Management

Console Interface:

Command Line:

SNMP:

RMON:

General Information:

Port Configuration:

Other:

IntraCore 35516

Forwarding rate of 24 million packets per second at full wire speed over all network interfaces in a unit 32 Gbps switch fabric (per unit) minimizes blocking and latency

Runs cooler and more reliably than older, multi-chip designs

Choose from 2 popular Gigabit configurations with auto-selectable switching

-12 ports 10/100/1000BaseT and 4 dual function ports of GBIC/1000BaseT

-12 ports GBIC and 4 dual function ports of GBIC/1000BaseT

Run multimode or singlemode fiber 1000 Mbps (1000BaseSX/LX/LH/LZ) using GBIC transceivers Run standard Category 5E UTP copper cables up to 100 meters at 1000 Mbps (1000BaseT)

Classless Inter-Domain Routing (CIDR), RIP I/II, RIP 1 compatible, split horizon, poison reverse, Authentication (plain text and MD5), Route Redistribution, OSPF V2 including – External Route summarization, Stub areas, Authentication, Virtual links, Default Route Originate, ICMP, ARP, Proxy ARP, Static routes support (Routing table insert/delete) – 16,000 routing table entries, Router Standby Protocol, Router Discovery Protocol, IGMP V1, V2 and IP Multicast Routing Protocol DVMRP

-Preventing Routing Updates through interface

-Controlling Advertising of Routes in Routing updates

-Controlling Processing of Routing updates

-Filtering sources of Routing Information

-Redistributing Routing Information (Route Maps)

Supports multiple priority queues to ensure mission critical applications get the bandwidth and priority they need. IEEE802.1p: 8 queues per port.

Access Control Lists (ACL) – Cisco-like

-Standard ACL

-Extended ACL Filtering – IP address

Filtering – based on Layer 4 data

Internet group management protocol (IGMP V1/2) optimizes multicast bandwidth by allowing multicast traffic only to registered users; minimizes denial of service attacks from unknown sources.

2K multicast groups are supported.

Logically organize nodes into 4000 port based VLANs compliant with IEEE 802.1Q with VLAN Tagging and double- Dot1Q tagging.

Supports 8000 MAC addresses with MAC address aging management and MAC/IP address table display Primary IP address – one

Secondary IP addresses – multiple Variable length Subnet Mask (VLSM)

Station move detection and Duplicate IP address detection.

Filtering based on IP addresses.

Neighbor Router Authentication

IEEE 802.1D supported

Supports frames up to 16384 bytes

CLI telnet or out-of-band via front panel console port CLI command line for industry standard syntax UI

SNMP v1 supported with MIB II, RMON, 802.1Q, 802.1p, Bridge MIB and Asante private MIB, RIP MIB 4 Groups (Stats, History, Alarms, Events)

Software version, dual firmware banks; admin, system and bootstrap info; switch address and uptime system clock State (forwarding, blocking) set by STP, status (enabled, disabled), link status (up, down), priority and security. Detailed statistics include TX counters (total frames, total bytes, dropped frames), RX counters (total frames, total bytes, unicast, non-unicast), frame counters (multicast, broadcast, by packet sizes), collisions and errors (undersized, oversized, CRC/alignment, fragments, FCS, late events, total)

Trace Route, PING tools, Syslog

3