Ashdown Design & Marketing Electric Blue 180, ABM/RPM-1 Specifications, Outputs, Equalisation ABM

Specifications

ABM, MAG 300 & ELECTRIC BLUE 180 PREAMPS

INPUTS
High Input	Impedance 3.9M Ohms
Low Input	Impedance 10K Ohms
Line Input (ABM only)	Impedance 22K Ohms
Effects Return	Impedance 22K Ohms
OUTPUTS
Tuner Output	Impedance 22K Ohms
Sub Output (ABM only)	Impedance 22K Ohms
Effects Send	Impedance 22K Ohms
D.I. Output	600 Ohms balanced
Low Pass (RPM1 only)	Impedance 1K Ohms
High Pass (RPM1 only)	Impedance 1K Ohms
Full Range (RPM1 only)	Impedance 1K Ohms
Speaker Outputs	Minimum impedance 4 Ohms

Input range 150mV to 20V p-p Input range 300mV to 40V p-p Input level 0dBu nominal Input level 0dBu nominal

Level 0dBu nominal Level 0dBu nominal Level 0dBu nominal Level -20dBu nominal Level switched 0/+4dBU Level switched 0/+4dBU Level switched 0/+4dBU

EQUALISATION (Electric Blue 180 & MAG 300)		EQUALISATION (ABM)
Bass	+/-15dB @ 100Hz	Shape (Push Flat)	+8dB @ 50Hz & 4kHz, -8dB @
Lo Mid	+/-15dB @ 220Hz		400Hz, filter slope - 6dB/octave
Middle	+/-15dB @ 660Hz	Bass	+/-15dB @ 45Hz
Hi Mid	+/-15dB @ 1.6kHz	Middle	+/-15dB @ 660Hz
Treble	+/-15dB @ 7kHz shelving	Treble	+/-15dB @ 7kHz shelving
Deep	+8dB @ 50Hz	Slider1	+/-15dB @ 110Hz
Bright	+10dB @ 10kHz	Slider 2	+/-15dB @ 340Hz
Signal to Noise	Better than 80dB (EQ flat)	Slider 3	+/-15dB @ 1.3kHz
Distortion	Less than 0.5% THD	Slider 4	+/-15dB @ 2.6kHz

GENERAL SPECIFICATION
Frequency Response	-3dB at 17Hz and 30KHz (Electric Blue 150: -3dB at 22Hz and 25KHz)
Rack Preamp RPM1 Crossover	Variable between 35 and 160Hz
Power Requirements	230 / 115V

Park Farm • Inworth • Colchester • Essex • CO5 9SH

E-mail: info@ashdownmusic.co.uk