   
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Tel: (585) 872-0010, Fax: (585) 872-0739
www.ashly.com, e-mail: info@ashly.com

Ashly manufactures a complete and comprehensive line of Analog and Digital Signal Processors, Power

Amplifiers, Mixers, and Amplifier Input Options. Please call, write or visit our web site for information on

any of these Ashly Products.

Rear Panel 800 and 1200 (no screw terminals on 1800, 2400, 3000, 3800)

PE-Series Specications 800 1200 1800 2400 3000 3800

Power Output
Stereo Mode, both channels driven
8 ohms, 20 Hz - 20 kHz, 1% THD 200W 300W 500W 700W 900W 1100W
4 ohms, 20 Hz - 20 kHz, 1% THD 400W 600W 900W 1200W 1500W 1900W
Bridged Mono Mode
8 ohms, 20 Hz - 20 kHz, 1% THD 800W 1200W 1800W 2400W 3000W 3800W
Parallel Mono Mode
2 ohms, 20 Hz - 20 kHz, 1% THD 800W 1300W 1800W 2400W 3000W 3800W
70V nr nr nr 1200W 1500W 1700W
Power Requirements (1/8 Power) 420W 640W 6112W 790W 1010W 1220W
Signal to Noise 20 Hz-20 kHz, unweighted
>98 dB >105 dB >108 dB >110 dB >111 dB >112 dB
Output Circuitry [Bipolar] Class AB AB H H H H
Power Cable Connector 15A Edison 20A 20A 20A
30A Twistlock 30A Twistlock
Weight lbs./ kg. 22/9.98 22/9.98 23/10.43 23/10.43 24/10.89 24/10.89

PE-Series Specications (All)

Distortion (SMPTE, typical) <.01% (8Ω load, 10dB below rated power)
Distortion (THD+N, typical) <.01%
(8Ω load, 10dB below rated power, 20Hz-10 kHz)
Frequency Response 20 Hz - 20 kHz, +/- 0.15 dB
Damping Factor - 8 ohm load, < 1 kHz > 400
Input Impedance 20 kΩ, balanced
Maximum Input Level: +21 dBu
Cooling temperature dependent speed-controlled axial fan
Control Network
onboard, compatible with std 100MB Ethernet hardware
Front Panel Indicators (Per channel) Clip, -6 dB, -12 dB, -18 dB, Temp, Output current.
Overall
pwr, stdby, protect, bridged mono, parallel mono, comm
Attenuators Per channel: front panel, software, offset and remote
Input Connectors, each channel XLR female/TRS, Euroblock, XLR male (looping)
Output connectors, each channel Speakon, screw terminals (Model 800 and 1200 only)
Amplier Protection inrush current limitation, temperature monitoring heat-sinks,
output DC, power transistor, SOA, output over-current, mains fuses
Load Protection Adjustable clip limiter
Dimensions 19”W x 3.5”H x 15.5”D (483mmW x 88.9mmH x 394mmD)