General Specifications Powerflex 470

Crosstalk: < -75dB (20Hz - 1KHz)

*Power Output

 

(Maximum Average Power, 0.1% THD, 1KHz)

Signal Present Signal Sensitivity: 14mV RMS (-34.9dBu)

Rated Per Channel, Two Channels Driven

Power Requirement: 110-125VAC, 220 - 250VAC, 50/60Hz

70V: 300Watts RMS

 

140V (Mono Bridged, 1-Channel): 600 Watts RMS

Typical Idle Current

 

120V: 0.94A

Rated Per Channel, Four Channels Driven

240V: 0.48A

70V: 250 Watts RMS

 

140V (Mono Bridged, 2-Channels): 500 Watts RMS

Current with Typical Audio Program Material (4 Channels Driven)

 

120V: 10.0A

Input Impedance: 10K ohm balanced, 37K ohm unbalanced

240V: 5.0A

High Pass Filter: 80Hz, 12dB/octave, internally selectable

Connections

 

Input: Euroblock

**THD (20Hz - 20KHz, 250W, 4-Channels Driven): <0.5%

Output: Screw Terminal

**IMD

Cooling: Forced Air, Thermal Sensitive 2-Speed Fan, Front Inlet/Rear

(SMPTE 60Hz/7KHz 4:1): <0.2%

Outlet

**Hum and Noise: < -100dB from full output (A-weighted)

 

 

Dimensions: 19”L x 5.25”H x 16.5”D

Full Power Input Sensitivity: 1.4V RMS (5.1dBu)

 

 

Construction: All-Steel Chassis, Extruded Aluminum Front Panel

Frequency Response: ±0.5dB (20Hz-20kHz, full power)

 

 

Weight: 45 lbs. net, 52 lbs. shipping

Voltage Gain: 50X (34.0dB)

 

 

Specification conditions are: 120VAC mains at 60Hz, 25° C

 

 

* Continuous power limited by power line capacity

**Non-conventional amplifiers require bandwidth limiting for all distortion and noise measurements Signal peaks in audio programming may trigger protection circuitry at low line voltages

Specifications are subject to change or improvement without notice

Rear Panel Powerflex-470

Applications:

Any 70V and 140V multichannel power amplification application, paging systems, cinema systems, boardroom audio applications, multiple zone restaurant, bar, theme park or auditorium systems.

Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,

Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and

Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739

Internet: http://www.ashly.com, email: info@ashly.com

Page 2
Image 2
Ashly specifications Rear Panel Powerflex-470, Applications, Imd

470 specifications

The Ashly 470 is a cutting-edge amplifier designed for professional audio applications, offering unparalleled performance and reliability. This amplifier is particularly popular among sound engineers and audio professionals due to its wide array of features and advanced technological integration.

One of the standout characteristics of the Ashly 470 is its power output. With a robust configuration, it delivers up to 250 watts per channel, making it suitable for both small venues and large concert halls. The architecture of the amplifier ensures high efficiency and minimal distortion, providing crystal-clear sound reproduction across a variety of audio frequencies.

The Ashly 470 also boasts an incredible frequency response range, enabling it to handle everything from deep bass tones to high-fidelity treble sounds. This versatility ensures that it meets the demands of diverse audio applications, whether in live sound reinforcement or studio recordings.

Another hallmark of the Ashly 470 is its advanced protection circuitry. This technology safeguards both the amplifier and connected speakers from potential damage due to overheating, overloading, or short circuits. This ensures not only longevity for the device but also peace of mind for users during high-demand performances.

Connectivity is seamless with the Ashly 470, which features multiple input options, including XLR and TRS connectors. This flexibility allows it to integrate easily into existing audio setups. Furthermore, its user-friendly interface simplifies operation, enabling users to make adjustments swiftly during live events.

In addition to its sonic capabilities, the Ashly 470 is lightweight and compact, allowing for easy transport and installation. The rugged design ensures that it can withstand the rigors of touring and live performances, making it a reliable choice for professionals on the go.

Overall, the Ashly 470 is an amplifier that combines power, versatility, and advanced technology. Its robust performance characteristics make it ideal for a wide range of audio applications, solidifying its reputation in the industry. Whether for concert sound systems, corporate events, or installations, the Ashly 470 is an amplifier that delivers exceptional results, making it a preferred choice among audio professionals.