Ashly specifications Applications, Rear Panel Powerflex-670

General Specifications Powerflex-670	Crosstalk: < -75dB (20Hz - 1KHz)
*Power Output
(Maximum Average Power, 0.1% THD, 1KHz)	Signal Present Signal Sensitivity: 14mV RMS (-34.9dBu)
Rated Per Channel, Two Channels Driven	Power Requirement: 110-125VAC, 220 - 250VAC, 50/60Hz
70V: 300 Watts RMS
140V (Mono Bridged-1, Channel): 600 Watts RMS	Typical Idle Current
	120V: 0.9A
Rated Per Channel, Six Channels Driven	240V: 0.5A
70V: 200 Watts RMS
140V (Mono Bridged, 3 channels): 400 Watts RMS	Current with Typical Audio Program Material (6 Channels Driven)
	120V: 10A
Input Impedance: 10K ohm balanced, 37K ohm unbalanced	240V: 5A
High Pass Filter: 80Hz, 12dB/octave, internally selectable	Connections
	Input: Eurobloc
**THD (20Hz - 20KHz, 200W, 6-Channels Driven): <0.5%	Output: Screw Terminal
**IMD	Cooling: Forced Air, Thermal Sensitive 2-Speed Fan, Front Inlet/Rear
(SMPTE 60Hz/7KHz 4:1): <0.2%	Outlet
**Hum and Noise: < -100dB from full output (A-weighted)	Dimensions: 19”L x 5.25”H x 16.5”D
Full Power Input Sensitivity: 1.4V RMS (5.1dBu)	Construction: All-Steel Chassis, Extruded Aluminum Front Panel
Frequency Response: ±0.5dB (20Hz-20kHz, full power)	Weight: 47 lbs. net, 54 lbs. shipping
Voltage Gain: 50X (34.0dB)	Specification conditions are: 120VAC mains at 60Hz, 25° C

* Continuous power limited by power line capacity

**Non-conventional amplifiers require bandwidth limiting for all distortion and noise measurements Signal peaks in audio programming may trigger protection circuitry at low line voltages

Specifications are subject to change or improvement without notice

Rear Panel Powerflex-670

Applications:

Any 70V and 140Vmultichannel power amplification application, paging systems, sound masking systems, cinema systems, board- room audio applications, multiple zone restaurant, bar, theme park or auditorium systems.

Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,

Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and

Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739

Internet: http://www.ashly.com, email: info@ashly.com