Page - 2

Operator Manual – SRA Series Amplifiers

 

 

 

Important Safety

Instructions - 2

Introduction - 3

The SRA Series - 4

Physical Description - 5

Installation - 6

Operation - 8

Troubleshooting - 9

Spec Table - 10

Dimensions - 11

Warranty - 12

Important Safety Instructions

Consignes de sécurité à lire attentivement

This power amplifier can produce dangerous

Cet amplificateur de puissance peut produire un

output voltage, power and sound pressure

voltage et une pression acoustique qui pourrait être

levels. In order to minimize the risk of injury,

dangereuse ou pourrait meme causer des

damage, or hearing loss, please read the entire

problêmes ou perte accuité auditive. Consultez le

owner’s manual.

manuel d’instruction et observez les consignes.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

 

Le symbole de la flèche dans un triangle équilateral symbolisant la foudre est

intended to alert the user to the presence of uninsulated "dangerous voltage"

 

prévu pour sensibiliser l’utilisateur à la présence de tension de voltage non isolée

within the product's enclosure that may be of sufficient magnitude to constitute a

 

à l’intérieur de l’appareil. Elle pourrait constituer un danger de risque de

risk of electric shock to persons. The exclamation point within an equilateral

 

décharge électrique pour les utilisateurs. Le point d’exclamation dans le triangle

triangle is intended to alert the user to the presence of important operating and

 

équilatérale alerte l’utilisateur de la présence de consignes qu’il doit d’abord

maintenance instructions in the literature accompanying the device.

 

consulter avant d’utiliser l’appareil.

 

 

 

This manual uses a Perpetual Table Of Contents. Each page has a copy of the manual’s contents in a gray box just like this one. The section you are in will always be bold with the other sections “grayed out.” The feature allows you to jump directly to another section without having to return to a Table Of Contents page.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6.Do not use this apparatus near water.

7.Clean only with dry cloth.

8.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

9.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

11.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12.Only use attachments/accessories specified by the manufacturer.

13.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1.Lisez ces instructions.

2.Conservez ces instructions.

3.Observez les avertissements.

4.Suivez ces instructions.

5.Pour réduire le risque de feu ou la décharge électrique, ne pas exposer cet appareil pour pleuvoir ou l'humidité.

6.Ne pas utiliser l’appareil près de l’eau.

7.Le nettoyer à l’aide d’un tissus sec.

8.Ne pas bloquer les ouvertures de ventilation, installer selon les consignes du fabricant.

9.Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres appareils qui produisent de la chaleur.

10.Ne pas modifier ou amputer le système de la mise à terre. Une prise avec mise à terre comprend deux lames dont une plus large ainsi qu’une mise à terre: ne pas la couper ou la modifier. Si la prise murale n’accepte pas la fiche, consulter un électricien pour qu’il remplace la prise désuète.

11.Protéger le cordon de secteur contre tous bris ou pincement qui pourraient l’endommager, soit à la fiche murale ou à l’appareil.

12.N’employer que les accessoires recommandés par le fabricant.

13.N’utiliser qu’avec les systèmes de fixation,chariots, trépied ou autres, approuvés par le fabricant ou vendus avec l’appareil.

14.Débrancher l’appareil lors des orages électriques ou si inutilisé pendant une longue période de temps.

15.Un entretient effectué par un centre de service accrédité est exigé si l’appareil a été endommagé de quelque façon: si il a été exposé à la pluie,, l’humidité ou s’il ne fonctionne pas normalement ou qu’il a été échappé.

Copyright© 2010 – Ashly Audio Inc.

Page 2
Image 2
Ashly R-052510 manual Operator Manual SRA Series Amplifiers

R-052510 specifications

The Ashly R-052510 is a cutting-edge audio processing device designed for professional audio applications. It stands out in today’s market thanks to its innovative features and technologies that cater to the needs of sound engineers, audiophiles, and anyone dedicated to high-quality audio.

One of the main features of the R-052510 is its comprehensive DSP (Digital Signal Processing) capabilities. This technology allows for real-time audio manipulation, ensuring optimal sound quality in various environments. The device provides extensive signal routing options, enabling users to customize the audio paths according to their specific requirements. This flexibility makes it an ideal choice for live sound, recording studios, and broadcast applications.

The R-052510 also incorporates a user-friendly interface, equipped with an intuitive LCD display that simplifies navigation through its extensive features. Users can easily access and adjust settings such as equalization, compression, time alignment, and limiting with minimal effort. This focus on user experience allows sound professionals to quickly achieve the desired audio results.

In terms of connectivity, the R-052510 offers a plethora of options. It features both analog and digital inputs and outputs, including AES/EBU, SPDIF, and USB interfaces. This versatility facilitates seamless integration into any existing audio setup, making it suitable for both modern digital audio workflows and traditional analog systems.

The device also boasts advanced control options. With its network capability, users can manage the R-052510 remotely via Ethernet, allowing for more dynamic control during live performances or studio sessions. This feature enhances convenience, especially in situations where manual adjustments might be challenging.

Durability is another hallmark of the Ashly R-052510. Designed for professional use, it features a rugged chassis that can withstand the rigors of touring and installation. This reliability ensures that users can depend on the device in demanding environments.

In summary, the Ashly R-052510 is a powerful audio processing unit that combines high-quality sound manipulation with intuitive control and robust design. Its advanced DSP capabilities, extensive connectivity options, and user-friendly interface make it an invaluable tool for audio professionals looking to elevate their sound quality.