Asko D3731 - page 8

Page 8

SPECIAL SETTINGS MENUSPECIAL SETTINGS MENU

SPECIAL SETTINGS MENU

Model D3731 has several special settings available,

as defined below. To access them, press the Menu

button until “Special Settings” displays then press Set.

Language

You can change the language in the display window to

one of the following:

English French

Swedish German

Danish Italian

Norwegian Spanish

Finnish Netherlands

Russian

To change the language, follow the steps below:

1. Press Menu until “Special Settings” displays then

press Set.

2. Press Menu again until “Language” displays.

3. Press Set until your language choice displays.

4. Press Menu to confirm your selection.

5. Keep pressing Menu until the display says “Exit”.

Next, press Menu once more and you will leave the

Special Settings Menu.

End-of-Program Buzzer Volume

At the end of each program, a buzzer sounds. You can

adjust the volume of the buzzer as follows:

1. Press Menu until “Special Settings” displays then

press Set.

2. Press Menu again until “Buzzer” displays.

3. Press Set until your volume preference displays.

Your choices are 1 (softest) to 9 (loudest). A “0”

indicates the buzzer is off.

4. Press Menu to confirm your selection.

5. Keep pressing Menu until the display says “Exit”.

Next, press Menu once more and you will leave the

Special Settings Menu.

Celsius or Fahrenheit

You can change the temperature on the display window

from Celsius to Fahrenheit and vice versa. To do this,

follow the steps below:

1. Press Menu until “Special Settings” displays then

press Set.

2. Press Menu again until “°C” or “°F” displays.

3. Press Set until your preference displays.

4. Press Menu to confirm your selection.

5. Keep pressing Menu until the display says “Exit”.

Next, press Menu once more and you will leave the

Special Settings Menu.

Activating the Child-Safe Button

This model can be programmed not to start unless the

Start button is held down for three seconds.

To set the child lock feature, follow the steps below:

1. Press Menu until “Special Settings” displays then

press Set.

2. Press Menu again until Child Lock displays.

3. Press Set to turn the feature on.

4. Press Menu to confirm your change.

5. Keep pressing Menu until the display says “Exit”.

Next, press Menu once more and you will leave the

Special Settings Menu.

A key symbol appears in the display when the child lock

is active. To deactivate the child lock, press the Set and

Menu buttons simultaneously. You can then select the

program and options and press Start to start the unit.

The child lock comes back on automatically after three

minutes.

To permanently deactivate the lock, repeat the above

steps.

Water Consumption

You can view how much water the machine used the

last time it was operated and how many times it has

been used since it was new. To do this, follow the steps

below.

1. Press Menu until “Special Settings” displays then

press Set.

2. Press Menu again until “Water Consumption”

displays.

3. Press Set to view the water usage (in litres).

4. Press Set again to view the number of times the

machine has been used.

5. Keep pressing Menu until the display says “Exit”.

Next, press Menu once more and you will leave the

Special Settings Menu.

RESTREST

RESTORING FORING F

ORING FORING F

ORING FAA

ACTCT

CTCT

CTOROR

OROR

ORYY

Y--

DEFDEF

DEFAA

AULUL

ULUL

ULT SETTINGST SETTINGS

T SETTINGST SETTINGS

T SETTINGS

You can easily restore the factory default settings (except

language) by following the steps below:

1. Turn off the power. Wait approximately 5 seconds.

2. Hold in the Program button while pressing the main

power button.

3. Release the program button.