Washer Quick Start Guide

W6641/W6661

We know you’re excited about owning an ASKO washing machine and you’re anxious to get started, so here is a brief summary of the operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.

THE CONTROL PANEL

Models W6641 and W661 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a wash program, simply press one of the preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.

Preset Programs

Press one of these buttons to select a program.

LCD Window

Displays the wash program, spin speed, temperature settings, and program run time.

Power Button

Press to turn on power to the machine.

Power Indicator Light

Glows when the power is turned on.

Start/Stop Button

Door Open Button

Press to start or

Press to open the

stop a program.

glass door.

 

Program Selection Controls

These buttons allow you to customize the preset program settings, such as wash temperatures, spin speed, rinses, display language, etc. Refer to the Use and Care Guide for instructions.

Power Button

The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the glass door, set the programs or start the machine.

Start/Stop Button

This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using the Start/ Stop button, you will have to reselect a program and press Start/Stop to restart the machine.

Door Open Button

If you need to open the door during a program, press and hold Door Open for a few seconds. The machine will stop and automatically drain enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door manually in case of power failure, refer to your Use and Care Guide.

Preset Programs

This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start.

Preset

 

 

 

Wash

Spin

# of

Short

Long

Program

Wash Cycle

Types of Laundry

Temp (1)

Speed (1) (2)

Rinses

Spin

Spin

P1

Light wash

Normally soiled loads

140° F

1600 rpm (3)

5

2

yes

P2

Light wash

Normally soiled perma press

105° F

1600 rpm (3)

5

2

yes

P3

Quick wash

Lightly soiled fabrics

105° F

1600 rpm (3)

3

0

yes

P4

Hand wash

Washable silks, nylon, etc.

85° F

800 rpm

3

1

no

NOTES:

(1)

You can temporarily adjust the temperature settings and spin speed. (See “Temporary Program Changes” below.)

 

 

 

 

 

 

 

 

(2)These are the maximum spin speed settings allowed for the program.

(3)Model W640 has a maximum spin speed of 1400 rpm.

You can easily customize the preset programs to best fit your laundry needs. See “Customizing the Preset Programs” in your Use and Care Guide.

Temporary Program Changes

You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset program you want to use then follow the instructions below. The settings will revert to normal at the end of the program.

Temperature – Press until the desired temperature displays in the LCD window. (The options are 85°, 105°, 120°, 140°, 160°, 175°, and 205°.) If you also want to change the spin speed, read the following paragraph, otherwise, press Start.

Spin Speed – Press

until the desired spin speed displays in the LCD window then press Start. (The spin speeds advance in 200 rpm

increments.)

 

Page 1
Image 1
Asko W6661 quick start Power Button, Start/Stop Button, Door Open Button, Preset Programs