Aspire Digital 8930Q manual Post

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are	Format: HH:MM:SS
	displayed with 24-hour format.	(hour:minute:second)
		System Time
System Date	Sets the system date.	Format MM/DD/YYYY
		(month/day/year)
		System Date
Total Memory	This field reports the memory size of the
	total memory in the system.
VGA Memory	Shows the VGA memory size. VGA
	Memory size=64/128MB
Quiet Boot	Determines if Customer Logo will be	Option: Enabled or
	displayed or not; shows Summary Screen	Disabled
	is disabled or enabled.
	Enabled: Customer Logo is displayed, and
	Summary Screen is disabled.
	Disabled: Customer Logo is not displayed,
	and Summary Screen is enabled.
Network Boot	Enables, disables the system boot from	Option: Enabled or
	LAN (remote server).	Disabled
F12 Boot Menu	Enables, disables Boot Menu during	Option: Disabled or
	POST.	Enabled
D2D Recovery	Enables, disables D2D Recovery function.	Option: Enabled or
	The function allows the user to create a	Disabled
	hidden partition on hard disc drive to store
	operation system and restore the system
	to factory defaults.
SATA Mode	Set harddisk controller configure type

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

Chapter 2 43