3.3.4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
ATA/IDE Configuration | [Enhanced] |
SATAII 1 | [Hard Disk] |
SATAII 2 | [Not Detected] |
SATAII 3 | [Not Detected] |
SATAII 4 | [Not Detected] |
IDE1 Master | [ATAPI CDROM] |
IDE1 Slave | [Not Detected] |
Set [Compatible] when Legacy OS
Set [Enhanced] when Native OS (Win2000 / XP) is used.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE 1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.
Because Intel® ICH7 south bridge only supports four IDE devices under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4] when the installed device is used with legacy OS.
| [SATA 1, SATA 2, | [SATA 1, SATA 3, | [IDE 1, SATA 2, |
| SATA 3, SATA 4] | IDE 1] | SATA 4] |
Master | SATAII 1, SATAII 2 | SATAII 1 | SATAII 2 |
|
|
|
|
Slave | SATAII 3, SATAII 4 | SATAII 3 | SATAII 4 |
|
|
|
|
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will use the “Primary IDE Master” as the example in the following instruction.
3 3
