Chapter 7 BIOS SETUP UTILITY

7.1Introduction

This section explains how to use the BIOS SETUP UTILITY to configure your system. The BIOS chip on the system stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will continue with its test routines.

If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also restart by turning the system off and then back on.

Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.

7.1.1 BIOS Menu Bar

The top of the screen has a menu bar with the following selections:

Main

To set up the system time/date information

OC Tweaker

To set up overclocking features

Advanced

To set up the advanced BIOS features

Fan Control

To display current fan speed status

Boot

To set up the default system device to locate and load the

 

Operating System

Security

To set up the security features

Exit

To exit the current screen or the BIOS SETUP UTILITY

Use <> key or < > key to choose among the selections on the menu bar, and then press <Enter> to get into the sub screen.

3 5