Assa Mechanical Pushbutton Locks manual 1 0 1 4 0 0 - 2 6 D, Simplex 900 Series, Example

Simplex®

Access Control Catalog - June 2004

Simplex® 900 Series

Light Commercial / Residential Locks

Key override

15⁄16"

*

(24 mm)

3 3⁄4"

2 1⁄16"

5"

(52 mm)

(127 mm)

(95 mm)

1 1⁄8

"

(29 mm)

3 11⁄16"

2 9⁄16"

(94 mm)

5⁄8"

1 9⁄16"

(65 mm)

(16 mm)

(40 mm)

Back Interior

Front Exterior

Side Exterior

Side Interior

(Spring latch models)

Example	9	1 0 1 4 0 0 - 2 6 D	- 4 1
	9	-	-	-	4 1
	Model	Options	Finishes		Packaging
Build the model number with the desired options
Model		Options	Finishes		Packaging

Models 902, 904, 906, 910 are auxiliary locks with manual relock. Entry		Select up to 4 options and insert 0 if less than			04	41
is by combination, egress is by interior thumbturn. They are deadbolt,		4 options required.			Satin Brass	1 per box
with 1" (25 mm) throw, flat face plate.		0	None
					(633) not
902						Locks
					available for
Door thickness 1 3⁄8"-1 1⁄2" (35-38 mm)		1	Substitutes a surface mounted strike box for
					model 929	shipped
904			metal door frames in place of the standard
						12 per case
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)			mortise strike box (Part Number 74464)
906					26D
Door thickness 1 3⁄8"- 1 1⁄2" (35-38 mm)		2	Deletes the key cylinder from key override models.		Satin Chrome
Key override			Recessed escutcheon recommended for standard rim
					(626)
910
			cylinder installation. Your rim cylinder tailpiece must be
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)			reduced in width to accommodate the tail receptacle.
Key override
			Specify the position of your cylinder tailpiece
Models 917, 919, 920, 922, 929, 935, 938 have automatic relock. Entry
			(vertical or horizontal) to mate with your standard
is by combination, egress is by interior thumbturn. They have a dead-
			size rim cylinder (not supplied)
locking latch, with 5⁄8" (16 mm) throw, flat face plate. Model 929 is DOD
compliant.		3	Substitutes a 2 1⁄2" (64 mm) lever in place
917
			of the standard inside thumbturn
Primary / auxiliary lock
			(Part Number 74437)
Door thickness 1 3⁄8"- 1 1⁄2" (35-38 mm)
Latch holdback		4 Master key (Key override model)
919
Primary / auxiliary lock		5	Adds the panic bar release kit to a spring
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)
Latch holdback			latch model (Part Number 74438)
920		6 Option is now a standard lock model.
Auxiliary lock
			Models have spring latch without latch
Door thickness 1 3⁄8"-1 1⁄2" (35-38 mm)
			holdback. See Models 920 and 922 in
922
			Ordering Information
Auxiliary lock
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)		7 Deletes the key cylinder from key override models
929
			and changes gear plate to a 100 Series. Recessed
Primary / auxiliary lock
			escutcheon recommended for standard rim cylinder
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)
DOD compliance			installation.Your rim cylinder tailpiece must be reduced
Face plate shield & padlock clasp included			in width to accommodate the tail receptacle. Specify
935			the position of your cylinder tailpiece (vertical or
Primary / auxiliary lock			horizontal) to mate with your standard size rim cylinder
Door thickness 1 3⁄8"- 1 1⁄2" (35-38 mm)			(not supplied)
Latch holdback
Key override		8	Changes gear plate to accept a horizontal tailpiece
938
Primary / auxiliary lock
Door thickness 1 3⁄4"- 2 1⁄8" (44-54 mm)
Latch holdback
Key override
Items supplied with the lock:
-	Installation instructions		-	Full-scale template
-	Strike for inswing and outswing doors (appropriate to latch type)		-	All hardware required for a complete installation

44