Astatic WM-625S manual Specifications for WM625 / WM625S

SPECIFICATIONS FOR WM625 / WM625S

Specifications

Element:

Dynamic

Pattern:

Omnidirectional

Frequency Response:

150 to 4500 Hz

Output Level:

-62 dB (0dB = 1 volt / microbar)

Impedance:

500ohms

Switch:

DPDT, Push-to-Operate Snap-action switch

Dimensions:

See outline drawing on other side

Weight:

103grams (3.6 oz.)

Finish:

Brushed Stainless Steel

TWO-YEARLIMITEDWARRANTY

Omnitronics, LLC (“ASTATIC”) hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event a defect occurs ASTATIC will, at its option, either repair or replace with a new unit of equal or greater value. You should retain proof of purchase to validate the purchase date and return it with any warranty claim. Return warranty claims carefully packed, insured and prepaid to the Service Department - 341 Harbor St. • Conneaut, OH 44030.

This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to ASTATIC’s instructions or unauthorized repair. All implied warranties or merchantability or fitness for a particular purpose are hereby disclaimed and ASTATIC hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.

Note: No other warranty, written or oral is authorized by Omnitronics, LLC.

p/n 46873-45-00 rev1 5/25/04 J.M.S.