24.Do not engrave or stamp anything into the housing to avoid weakening it.
25.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•Lead from
•Crystalline silica from bricks and cement or other masonry products
•Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.) WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)
26.The warnings and precautions discussed in manual cannot cover all possible conditions and situations that may occur. It must be understood by operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Vibration Precautions
This tool vibrates during use. Repeated or
1.Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical
2.Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of
3.Wear suitable gloves to reduce the vibration effects on the user.
4.Use tools with the lowest vibration when there is a choice between different processes.
5.Include
6.Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
7.To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately.
SAVE THESE
INSTRUCTIONS.
SKU 68022 | For technical questions, please call | Page 6 |