Using the Notebook PC 4

Inserting a PC Card (PCMCIA)

1.If there is a PC Card socket protector, remove it using the “Removing a PC Card” instructions be- low.

2.Insert the PC card with the connector side first and label side up. Standard PC cards will be flush with the Notebook PC when fully inserted.

3.Carefully connect any cables or adapters needed by the PC card. Usually connectors can only be in- serted in one orientation. Look for a sticker, icon, or marking on one side of the connector represent- ing the top side.

Be sure the PC card is level when inserting.

Removing a PC Card (PCMCIA)

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the PC card icon on the Windows taskbar and stop the PC card you want to remove.

1.Press in the toggle eject button and release. The recessed spring loaded toggle button will ex- tend when pushed in and released.

2.Press the extended button again to eject the PC Card. Carefully pull the ejected PC card out of the socket.

45