3.HARDWARE SETUP

6)Keyboard Power Up (KBPWR)

This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing <Spacebar>) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Enable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable but do not have the appropriate ATX power supply. NOTE: This jumper must be set in conjunction with Wake On PS2 KB/ PS2 Mouse/CIR in 4.5.1 Power Up Control.

Setting

KBPWR

Enable

[1-2] (default)

Disable

[2-3]

KBPWR

 

1

2

2

3

®

 

 

 

 

TUEG-VM

Enable

Disable

(default)

 

 

 

 

 

TUEG-VM Keyboard Power Setting

WARNING! Using a higher voltage may help when overclocking but may result in the shortening of your computer component’s life. It is highly recommended that you leave this setting on its default.

.3 SETUPH/W

Motherboard Settings

ASUS TUEG-VM User’s Manual

21