Asus 850 ATX 7. Appendix, HP WMT-LXManual, 4.5.1 Power Up Control, Wake On LAN or PCI Modem, 12)Wake-On-LANConnector (3-pinWOL), 13)USB2/3 Headers (10-1pin USB2/3)

12)Wake-On-LAN Connector (3-pin WOL)

This connector connects to a LAN card with a Wake-On-LAN output, such as the HP PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

Top:

RJ-45

WMT-LX

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

+5 Volt Standby PME

Ground

WMT-LX Wake-On-LAN Connector

13)USB2/3 Headers (10-1 pin USB2/3)

If the USB Ports on the back panels are inadequate, a USB header is available for two additional USB ports. Connect the 10-1 pin ribbon cable from the provided 2-port USB connector set to the midboard 10-1 pin USB header and mount the USB connector set to an open slot on your chassis.

Top:

RJ-45

WMT-LX

USB23

GND

LP3+

LP3–

SBV3

212

1 11

GND

LP2+

LP2–

SBV2

WMT-LX USB Port

HP WMT-LX Manual 19

+001-023 WMT-LX.p65 copy 19 3/23/01, 9:32 AM