Asus A7A266 NOTE, ASUS A7A266 User’s Manual, 6)Bass Center Setting (BCS1, BCS2), (NOTE: Only available on PCB 1.10 & later versions)

3. HARDWARE SETUP

A7A266

DSW

	ON 1			ON 1			ON 1		ON 1		ON 1		ON 1
	2			2			2				2		2
									2
	3			3			3				3		3
									3
	4			4			4				4		4
									4
	5			5			5				5		5
									5
	6			6			6				6		6
									6
	7			7			7				7		7
									7
	8			8			8				8		8
									8
	10 9			10 9			10 9				10 9		10 9
									10 9
5.0x			5.5x			6.0x		6.5x		7.0x		7.5x
	ON 1			ON 1			ON 1		ON 1		ON 1		ON 1
							2		2		2
	2			2									2
							3		3		3
	3			3									3
							4		4		4
	4			4									4
	5			5			5		5		5		5
	6			6			6		6		6		6
							7		7		7
	7			7									7
							8		8		8
	8			8									8
							10 9		10 9		10 9
	10 9			10 9									10 9
8.0x		8.5x			9.0x			9.5x		10.0x		10.5x

A7A266 CPU External

Clock (BUS) Frequency

Selection

	ON 1		ON 1		ON 1		ON 1
			2		2		2
	2
			3		3		3
	3
			4		4		4
	4
	5		5		5		5
	6		6		6		6
			7		7		7
	7
			8		8		8
	8
			10 9		10 9		10 9
	10 9
11.0x		11.5x		12.0x		>=12.5x

H/W SETUP

Motherboard Settings

6)Bass Center Setting (BCS1, BCS2)(NOTE: Only available on PCB 1.10 & later versions)

Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust output for 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position, type 1, to type 2, in order to reroute signals among the internal leads to the female Line-In, Line-Out, Mic sockets. Make sure a test is made using the C-Media Audio Driver software setup available on the Support CD. These jumpers effectively swap the audio channels for bass and center. NOTE: the default setting is compatible with Creative 6-Channel audio speaker system.

	BCS1
	BCS2
2 3	1	2
A7A266
type 1 Bass	type 2 Bass
(BASS/CENTER)	(CENTER/BASS)
(Default)

A7A266 Jumper Mode Setting

3.

ASUS A7A266 User’s Manual 23