SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

6)Bass / Center Setting (BCS1, BCS2)

Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust output for 4 or 6 speaker audio. Since no audio standard exists for the three pick-up surfaces on male audio jacks, it may be necessary to switch jumpers from the default position, Center/Bass, to Bass /Center in order to reroute signals to the Line-In, Line-Outand Mic sockets. Make a test using the C-Media Audio Driver software setup available on the Support CD.

A7N266

2

3

2

1

 

BCS1 BCS2

BCS1 BCS2

CENTER / BASS

BASS / CENTER

(Default)

 

A7N266 Bass Center Setting

7)Onboard Network Setting (LAN_EN) (LAN Models only)

The onboard LAN network chip (RTL8100) may be activated or deactivated. The operational default, [1-2], already enables the network function. Reset to [2-3] to disable the onboard ethernet.

A7N266

LAN_EN

1

2

2

3

 

 

 

 

 

Enable Disable (Default)

A7N266 On Board LAN Setting

20

ASUS A7N266 User’s Manual