7.Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

A7N8X-VM

CHASSIS1

+5VSB MB

Chassis Signal GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A7N8X-VM/400 Chassis Alarm Lead

(Default)

8.Front panel audio connectors (10-1 pin FP_AUDIO)

This is an interface for the front panel audio module that allows convenient connection and control of audio devices.

AGND

+5VA

BLINE OUT R

BLINE OUT L

A7N8X-VM

 

 

 

FP_AUDIO

 

 

 

MIC2

MICPWR

Line out R NC

Line out L

A7N8X-VM/400 Front Panel Audio Connector

ASUS A7N8X-VM/400 motherboard user guide

1-19