3.HARDWARE SETUP

22)IDE Activity LED (2-pin IDELED)

This connector supplies power to the cabinet’s IDE activity LED. Read and write activity by devices connected to the Primary/Secondary IDE and Primary/ Secondary ATA100 connectors will cause the LED to light up.

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

IDELED

A7PRO

A7PRO IDE Activity LED

NOTE: The LED will not light up during read and write activity by devices connected to the Primary or Secondary IDE connectors of motherboards with PCB versions earlier than Rev. 1.01.P (for example, Rev. 1.01.). To check your PCB version, see the area between PCI4 and PCI5 and look for the marking that starts with “REV.”

PCI4

PCI5

AMR

This PANEL illustration is for items 23–28 on the next page.

H/WSETUP

Connectors

3.

 

 

 

A7PRO

A7PRO System Panel Connectors

 

 

Speaker

Power LED

Connector

 

Ground Ground Speaker

+5 V

PLED

+5V

+5 V

TB LED

ExtSMI# Ground PWR Ground

Reset Ground

MessageLED

 

Reset SW

ATX Power

SMI Lead

 

 

Switch*

*Requires an ATX power supply.

ASUS A7PRO User’s Manual

43