2.5.1APM configuration

This menu shows the Advanced Power Management (APM) configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.

APM Configuration

Restore on AC Power Loss

[Power Off]

Suspend Mode

[Disabled]

Switch Function

[Break/Wake]

Hot Key Funtion As

[Power Off]

Power Button Override

[Instant Off]

RING Power Up Control

[Disabled]

MACPME Power Up Control

[Disabled]

PCIPME Power Up Control

[Disabled]

PS2 KB Wakeup from S3/S4/S5

[Ctrl+Alt+B_Space]

PS2 MS Wakeup from S3/S4/S5

[Disabled]

Power On By RTC Alarm

[Disabled]

x Month Alarm

NA

x Day of Month Alarm

0

x Time(hh:mm:ss) Alarm

0:0:0

Select Menu

Item Specific Help

Restore on AC Power Loss [Power Off]

Allows you to set whether or not to reboot the system after power interruptions. [Power Off] leaves your system off while [Power On] reboots the system. [Last State] sets the system back to the state it was before the power interruption. Configuration options: [Power Off] [Power On] [Last State]

Suspend Mode [Disabled]

Sets the time period before the system goes into suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [12 Min] [20 Min] [30 Min] [40 Min] [1 Hour]

Switch Function[Break/Wake]

Enables or disables the Break/Wake switch function.

Configuration options: [Disabled] [Break/Wake]

Hot Key Function [Power Off]

Allows you to select the hot key function.

Configuration options: [Disable] [Power Off] [Suspend]

2 - 26

Chapter 2: BIOS setup