Asus A7V DSW, VID, JEN, Note, Setting, 4.4 Advanced Menu, 2) JumperFree™ Mode (JEN), 1)Motherboard Features Settings (DIP Switches - DSW)

SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

1)Motherboard Features Settings (DIP Switches - DSW)

The motherboard’s onboard functions are adjusted through the DIP switches The white block represents the switch’s position. The default setting is OFF. Note:The diagram pictures Printed Circuit Board (PCB) 1.04, which has 5 DIP switches. PCB 1.02 has 4 DIP switches. The defaults shown below are identical for both versions.

			DSW
			5	4	3	2	1	OFF
								ON
							ON
		1. Frequency Selection
		2. Frequency Selection
		3. Frequency Selection
	A7V
		4. Frequency Selection
A7V DIP Switches		5. Frequency Selection

2) JumperFree™ Mode (JEN)

This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).

Setting	DSW	VID		JEN
Jumper Mode	(See #6 External	(See #8 Voltage		[1-2]
	Frequency Setting)	Regulator Output)
JumperFree™ Mode	All OFF	All [3-4]		[2-3](Default)
	Jumper Mode		JumperFree Mode
				(Default)

See External

Frequency

Setting

See Voltage Reg. Out. (VID)

DSW

5 4 3 2 1

OFF

ON

ON

1 2 3 4

VID4

VID3

VID2

VID1

A7V

JEN 1 2

JEN 2 3

A7V Jumper Mode Settings

18 ASUS A7V User’s Manual