SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

3)Voltage Over Setting (OVER1, OVER2)

This jumper opens or closes the circuit to control the use of voltage increases to enhance CPU performance. The default setting, [2-3] disables the use of “over- voltage” increases. Switch the jumper cap to [1-2] before attempting changes with the VID jumpers. NOTE: It is not recommended to use this feature unless confident that the CPU will not be damaged.

 

OVER2

 

 

OVER1

 

1

2

2

3

OVER Voltage

OVER Voltage

ENABLE

DISABLE

A7V266-EX

 

(Default)

 

 

A7V266-EX OVER Voltage Selection

4)Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)

This jumpers allow you to manually adjust the CPU core voltage. It is recommended to use CPU Default as the CPU core voltage. CPU Default, all jumpers [2-3], means the Vcore is generated according to the CPU VID configuration. For each jumper setting, there are two voltage options, depending on the CPU used.

1

2

3

1

2

3

VID4

VID3

VID2

VID1

1.85/1.825Volts

1.8/1.775Volts

1

2

3

1

2

3

 

VID4

A7V266-EX

VID3

 

VID2

 

VID1

1.75/1.725Volts 1.7/1.675Volts

A7V266-EX CPU Core Voltage

Selection

20

ASUS A7V266-EX User’s Manual