AGP & P2P Bridge Control

AGP & P2P Bridge Control

 

AGP Aperture

Size

 

 

 

 

[128MB]

 

AGP Mode

 

[4X]

Press [Enter] to

AGP Fast Write

[Disabled]

select.

AGP Master 1

WS Write

[Disabled]

 

AGP Master 1

WS Read

[Disabled]

 

AGP 3.0 Calibration Cycle

Enabled

 

Select Display Device

[CRT]

 

TV_Type

 

[NTSC]

 

TV_Connector

 

[CVBS]

 

AGP Aperture Size [XXXMB]

This field sets the size of mapped memory for AGP graphic data. Configuration options: [4M] [8M] [16M] [32M] [64M] [128M] [256M] [512M] [1G]

AGP Mode [4X]

AGP 4X transfers video data at 1066MB/s and is backward-compatible to AGP 1X video card. When set to [1X], the AGP interface only provides a peak data throughput of 266MB/s even if you are using an AGP 4x card.

Configuration options: [1X] [2X] [4X]

AGP Fast Write [Disabled]

This field enables or disables the AGP Fastwrite function.

Configuration options: [Disabled] [Enabled]

AGP Master 1 WS Write [Disabled]

Configuration options: [Disabled] [Enabled]

AGP Master 1 WS Read [Disabled]

Configuration options: [Disabled] [Enabled]

AGP 3.0 Calibration Cycle [Enabled]

This item is enabled by default.

Select Display Device [CRT]

This item allows you to select the type of display device.

Configuration options: [CRT] [TV] [CRT+TV] [DVI] [CRT+DVI] [TV+DVI]

2-14

Chapter 2: BIOS Information