Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options: [Enabled] [Disabled]
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.6APM
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
WOL (include AC Power Loss) [Disabled]
[Disabled] | Disables Wake On LAN after a power failure (G3 state). |
[Enabled] | Enables Wake On LAN after a power failure (G3 state). |
Power On By PME [Disabled]
[Disabled] | Disables the PME to wake up by PCI/PCIE devices. |
[Enabled] | Allows you to turn on the system through a PCI/PCIE LAN or modem card. |
| This feature requires an ATX power supply that provides at least 1A on the |
| +5VSB lead. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ |
| Minute/Second will become |
Chapter 2: BIOS information |