CPB Mode [Auto]
Disables the CPB (Core Performance Boost) mode or set it to [Auto] for automatic configuration. Configuration options: [Disabled] [Auto]
C6 Mode [Enabled]
Enables or disables C6 mode. Configuration options: [Enabled] [Disabled]
IOMMU [Disabled]
Set this item to [Enabled] to show IOMMU Mode. Configuration options: [Enabled] [Disabled]
Bank Interleaving [Enabled]
Enables or disables the bank memory interleaving. Configuration options: [Enabled] [Disabled]
Channel Interleaving [Enabled]
Enables or disables the channel memory interleaving. Configuration options: [Enabled] [Disabled]
Core Leveling Mode [Automatic mode]
Allows you to change the number of working Compute Unit on the system. Configuration options: [Automatic mode] [One core per processor] [One Compute Unit] [One core per Compute Unit]
2.6.2SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.
OnChip SATA Channel [Enabled]
Enables or disables onboard channel SATA port. Configuration options: [Disabled] [Enabled]
OnChip SATA Type [AHCI]
Allows you to set the SATA configuration.
[IDE] | Set to [IDE] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[RAID] | Set to [RAID] when you want to create a RAID configuration from the SATA |
| hard disk drives. |
[AHCI] | Set to [AHCI] when you want the SATA hard disk drives to use the AHCI |
| (Advanced Host Controller Interface). The AHCI allows the onboard storage |
| driver to enable advanced Serial ATA features that increases storage |
| performance on random workloads by allowing the drive to internally |
| optimize the order of commands. |
SATA Port 5 - Port 6 [AHCI]
This item only appears when OnChip SATA Type is set to [AHCI]. If SATA ports 5,
6 are configured as [AHCI], the ports can only be used under Windows® OS with the requested drivers installed. Set to [IDE] instead of [AHCI] to access devices on SATA ports 5, 6 before entering OS. Configuration options: [AHCI] [IDE]
ASUS |