
1.7.2Internal connectors
1.CPU and chassis fan connectorsConnect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
A88X-PLUS
CHA_FAN2 CPU_FAN
|
| CHA FAN PWM CHA FAN IN CHA FAN PWR GND | CPU FAN PWM CPU FAN IN CPU FAN PWR GND | ||||
CHA_FAN1 |
| ||||||
| GND CHA FAN PWR CHA FAN IN VCC |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.
• The CPU_FAN connector supports a CPU fan of maximum 2A (24W) fan power.
• Only the
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
+5V | SPDIFOUT GND |
SPDIF_OUT
The S/PDIF module is purchased separately.
Chapter 1: Product introduction |