3 Chapter

CPU Temperature / MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures.

CPU_FAN Speed [xxxx RPM] or [Ignore] / [N/A]

CHA_FAN1/2/3/4 Speed [xxxx RPM] or [Ignore] / [N/A] CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignore if you do not want to detect this item.

CPU Q-Fan Control [Disabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU_FAN Speed Low Limit [200 RPM]

This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

Q-Fan Profile [Standard]

This item appears only when you enable the Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan.

[Standard]

Sets to [Standard] to make the CPU fan automatically adjust

 

depending on the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan

 

operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual]

Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set Q-Fan Profile to [Manual].

Q-Fan Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range from 40ºC to 75ºC.

3-22

Chapter 3: BIOS setup