A.1.2 Installing SATA hard drives

To install Serial ATA hard drives:

1.Connect one end of the first SATA signal cable to the SATA connector labeled SATA 1.

2.Connect the other end of the SATA signal cable to the SATA connector on the first drive.

3.Connect one end of the second SATA signal cable to the other SATA connector labeled SATA 2.

4.Connect the other end of the second SATA signal cable to the SATA connector on the second drive.

5.Connect the 4-pin ATX SATA power plug to the SATA extension module.

Your Serial ATA power plug comes with one (1) 4-pin ATX power connector and two (2) Serial ATA power connectors.

6.Connect one SATA power connector to the first drive.

7.Connect the other Serial ATA power connector to the second drive.

3 5 1

7

4

6

2

A - 2

Appendix