10 . GAME/MIDI port connector (16-1 pin GAME)

This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files.

A8V-E SE

A8V-E SE Game connector

+5V

J2B1

J2CX

MIDI OUT

J2CY

J2B2

MIDI IN

 

GAME

 

 

 

 

 

 

 

+5V

J1B1

J1CX

GND

GND

J1CY

J1B2

+5V

The USB/GAME port module is purchased separately.

11 . Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled ÒChassis SignalÓ and ÒGroundÓ are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

A8V-E SE

+5VSB MB

Chassis Signal GND

CHASSIS

(Default)

A8V-E SE Chassis alarm lead

ASUS A8V-E SE

1 - 29