2.3.4Primary, Secondary, Third, and Fourth IDE Master/Slave
While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate
BIOS SETUP UTILITY
Main
Primary IDE Master
Device | : Hard Disk |
Vendor | : ST320410A |
Size | : 20.0GB |
LBA Mode | : Supported |
Block Mode | : 16 Sectors |
PIO Mode | : 4 |
Async DMA | : MultiWord |
Ultra DMA | : Ultra |
SMART Monitoring: Supported
Type | [Auto] |
LBA/Large Mode | [Auto] |
PIO Mode | [Auto] |
DMA Mode | [Auto] |
Smart Monitoring | [Auto] |
32Bit Data Transfer | [Enabled] |
Select the type of device connected to the system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of the appropriate IDE device type. Select CDROM if you are specifically configuring a
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data
ASUS | 2 - 15 |