Soft Access Point Mode (Soft AP)

You may set the wireless LAN adaptercard in soft access point mode. In soft AP, wireless LAN adapter can support up to 31 wireless clients in a home or small office network.

System requirements

Before setting your wireless LAN adapter as soft AP, make sure your system meets the following requirements:

•Windows® XP operating system

Wireless clients in home or small office network must have:

•An installed IEEE 802.11b compliant network interface card

•Windows® 98SE/ME/2000/XP operating system

Setting your wireless LAN adapter in Soft Access Point (Soft AP) mode

Do any of the following to set your wireless LAN adapter in soft AP mode:

Enter the Wireless Settings utility

1.Double-click the Control Center icon in the Windows taskbar to open the Wireless Settings utility.

2.Click the Config icon in the property window of the Wireless Settings utility, then select the SoftAP tab. Select Soft AP Mode, then click Apply.

3.A confirmation window appears click Yes.

ASUS DiGiMatrix

3-63