ProblemAction

The system continuously beeps after it was turned on

The message “Non-system disk or disk error” appears

Onboard IDE HDD is unstable

1.Check the memory modules and make sure you installed the DIMMs the system supports.

2.Make sure that the DIMMs are properly installed on the sockets.

Check if bootable HDD is active.

Install the utility drivers from the support CD that came with the package.

Network connection not available

1.Make sure the network cable is connector the RJ-45 port on the rear panel.

2.Make sure that you have installed the network drivers from the motherboard support CD.

ASUS AP130-D Pedestal Server

39