B.1 Simple Fixes

NOTE

Some problems that you may encounter are not due to defects on the system or the components. These problems only requires simple troubleshooting actions that you can perform by yourself.

ProblemAction

The power LED on the server and/or the monitor do not light up

The keyboard does not work

The mouse does not work

The system does not perform power-on self tests (POST) after it was turned on

1.Make sure that the 115V/230V voltage selector switch is set to the correct voltage supply in your area.

2.Check the power cable connection on the system rear panel if properly connected.

3.Make sure that the power cables are connected to a grounded power outlet.

4.Press the power button to make sure that the system is turned on.

Check the keyboard cable if properly connected to the keyboard port.

Check the mouse cable if properly connected to the mouse port.

1.Check the memory modules and make sure you installed the DIMMs the system supports.

2.Make sure that the DIMMs are properly installed on the sockets.

38

Appendix B: Troubleshooting