ProblemAction

The system does not perform power-on self tests (POST) after it was turned on

The system continuously beeps after it was turned on

The message “Non-system disk or disk error” appears

Network connection not available

1.Check the memory modules and make sure you installed the DIMMs the system supports.

2.Make sure that the DIMMs are properly installed on the sockets.

1.Check the memory modules and make sure you installed the DIMMs the system supports.

2.Make sure that the DIMMs are properly installed on the sockets.

1.Check if a bootable HDD is active.

2.Check if the HDDs are properly installed and connected to the SCSI connectors on the backplane.

Make sure the network cable is connected to the RJ-45 port on the rear panel.

ASUS AP1600R 1U Rackmount Server

47