Modem Connection

The telephone wire used to connect the Notebook PC’s internal modem should have either two or four wires (only two wires (telephone line #1) is used by the modem) and should have an RJ-11 connector on both ends. Connect one end to the modem port and the other end to an analog telephone wall socket (the ones found in residential buildings). Once the driver is setup, the modem is ready to use.

When you are connected to an online service, do not place the Notebook PC in suspend (or sleep mode) or else you will disconnect the modem connection.

Example of the Notebook PC connected to a telephone jack for use with the built-in modem:

Telephone connector is the smaller of the two ports.

Telephone connection is optional

Telephone Wall Jack

Telephone cables with RJ-11 connectors

CAUTION! For electrical safety concerns, only use telephone cables rated 26AWG or higher.

74

Notebook PC User Manual