Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus B85-PLUS 2.7.4CPU Q-FanControl [Enabled], 2.7.5Chassis1/2 Q-FanControl [Enabled], CPU Fan Speed Low Limit [200 RPM], CPU Fan Profile [Standard]

1 77

Download 77 pages, 2.8 Mb

2.7.4CPU Q-Fan Control [Enabled]

[Disabled]	Disables the CPU Q-Fan control feature.
[Enabled]	Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [200 RPM]

This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed.

Configuration options: [Ignore] [100RPM] [200RPM] [300 RPM] [400 RPM] [500 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan.

[Standard]	Sets to [Standard] to make the CPU fan automatically adjust depending on
	the CPU temperature.
[Silent]	Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]	Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual]	Sets to [Manual] to assign detailed fan speed control parameters.
	The following four items appear only when you set CPU Fan Profile to [Manual].

CPU Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range from 20ºC to 75ºC.

CPU Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle.

CPU Lower Temperature [20]

Displays the lower limit of the CPU temperature.

CPU Fan Min. Duty Cycle(%) [20]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature is under the lower limit, the CPU fan will operate at the minimum duty cycle.

2.7.5Chassis1/2 Q-Fan Control [Enabled]

[Disabled]	Disables the Chassis1/2 Q-Fan control feature.
[Enabled]	Enables the Chassis1/2 Q-Fan control feature.

Chassis1/2 Fan Speed Low Limit [600 RPM]

This item appears only when you enable the Chassis1/2 Q-Fan Control feature and allows you to disable or set the chassis1/2 fan warning speed.

Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

ASUS B85-PLUS

2-35

Contents

Page Page Chapter 1: Product introduction Chapter 2: BIOS information Appendices Electrical safety Operation safety How this guide is organized Where to find more information Conventions used in this guide Typography Package contents B85-PLUSspecifications summary ASUS 5X Protection ASUS Dig+VRM ASUS DRAM Fuse ASUS ESD Guards ASUS All 5K-HourSolid Capacitors Page 1.2.1Placement direction 1.2.2Screw holes 1.2.3Motherboard layout 1.2.4Layout contents 1.3.1Installing the CPU 1.3.2CPU heatsink and fan assembly installation To install the CPU heatsink and fan assembly To uninstall the CPU heatsink and fan assembly 1.4.1Overview 1.4.2Memory configurations 1.4.3Installing a DIMM Removing a DIMM 1.5.1Installing an expansion card 1.5.2Configuring an expansion card 1.5.3PCI slots 1.5.3PCI Express 2.0 x1 slots 1.5.4PCI Express x16 slots IRQ assignments for this motherboard 1.7.1Rear panel connectors PS/2 mouse port (green) Video Graphics Adapter (VGA) port LAN (RJ-45) port 1.7.2Internal connectors 2.ATX power connectors (24-pinEATXPWR, 8-pinEATX12V) B85-PLUSATX power connectors 3.Digital audio connector (4-1pin SPDIF_OUT) B85-PLUSDigital audio connector 4.Front panel audio connector (10-1pin AAFP) B85-PLUSFront panel audio connector 5.USB 2.0 connectors (10-1pin USB1112, USB1314) B85-PLUSUSB2.0 connectors 6.USB 3.0 connector (20-1pin USB3_12) B85-PLUSUSB3.0 Front panel connector 7.CPU and chassis fan connectors (4-pinCPU_FAN, 4-pinCHA_FAN1/2) B85-PLUSFan connectors 8.Intel® B85 Serial ATA 6.0Gb/s connector (7-pinSATA6G_1~4 [yellow]) B85-PLUSIntel® SATA 6.0Gb/s connectors 9.Intel® B85 Serial ATA 3.0Gb/s connectors (7-pinSATA_5~6 [dark brown]) B85-PLUSIntel® SATA 3.0Gb/s connectors 9.System panel connector (10-1pin PANEL) B85-PLUSSystem panel connector •System power LED (2-pinPWR_LED) •Hard disk drive activity LED (2-pinHDD_LED) •System warning speaker (4-pinSPEAKER) 1.8Onboard LEDs 1.Standby Power LED B85-PLUSOnboard LED 1.9.1Installing an operating system 1.9.2Support DVD information To run the Support DVD 1.9.3Intel® SBA support Platform requirements: CPU and chipsets requirements: 2.1.1EZ Update 2.1.2ASUS EZ Flash 2.1.3ASUS CrashFree BIOS 3 utility Recovering the BIOS 2.1.4ASUS BIOS Updater Before updating BIOS Booting the system to a DOS environment Updating the BIOS file Page Entering BIOS Setup at startup Entering BIOS Setup after POST BIOS menu screen EZ Mode Advanced Mode Menu bar Menu items Back button Submenu items Pop-upwindow Scroll bar Navigation keys General help Configuration fields 2.4.1System Language [English] 2.4.2System Date [Day xx/xx/xxxx] 2.4.3System Time [xx:xx:xx] 2.4.4Security Administrator Password User Password User Password Not Installed 2.5Ai Tweaker menu Target CPU Turbo-ModeSpeed : xxxxMHz Target DRAM Speed : xxxxMHz Target Cache Speed : xxxxMHz Target DMI/PEG Clock : xxxxMHz 2.5.1Ai Overclock Tuner [Auto] 2.5.2ASUS MultiCore Enhancement [Enabled] 2.5.3CPU Core Ratio [Auto] 2.5.4Min CPU Cache Ratio [Auto] 2.5.5Max CPU Cache Ratio [Auto] 2.5.6CPU bus speed : DRAM speed ratio mode [Auto] 2.5.7Memory Frequency [Auto] 2.5.8CPU Graphics Max. Ratio [Auto] 2.5.9GPU Boost [As is] 2.5.10EPU Power Saving Mode [Disabled] 2.5.11DRAM Timing Control Secondary Timings DRAM RAS# to RAS# Delay [Auto] DRAM REF Cycle Time [Auto] DRAM Refresh Interval [Auto] DRAM WRITE Recovery Time [Auto] tWRRD_dr [Auto] tWRRD_dd [Auto] tWRWR [Auto] tWRWR_dr [Auto] tWRWR_dd [Auto] 2.5.12DIGI+ VRM CPU Load-LineCalibration [Auto] CPU Fixed Frequency [XXX] CPU Power Phase Control [Auto] CPU Power Duty Control [T.Probe] 2.5.13CPU Power Management Enhanced Intel® SpeedStep Technology [Enabled] Turbo Mode [Enabled] 2.5.14Extreme OV [Disabled] 2.5.15CPU Core Voltage [Auto] CPU Core Voltage Override [Auto] Offset Mode Sign [+] Additional Turbo Mode CPU Core Voltage [Auto] 2.5.16CPU Cache Voltage [Auto] CPU Cache Voltage Override [Auto] Additional Turbo Mode CPU Cache Voltage [Auto] Total Adaptive Mode CPU Cache Voltage [Auto] 2.5.17CPU Graphics Voltage [Auto] CPU Graphics Voltage Override [Auto] Additional Turbo Mode CPU Graphics Voltage [Auto] Total Adaptive Mode CPU Graphics Voltage [Auto] 2.5.18CPU System Agent Voltage Offset Mode Sign [+] 2.5.19CPU Analog I/O Voltage Offset Mode Sign [+] CPU Analog I/O Voltage Offset [Auto] 2.5.20CPU Digital I/O Voltage Offset Mode Sign [+] CPU Digital I/O Voltage Offset [Auto] 2.5.21SVID Support [Auto] 2.5.24PCH VLX Voltage [Auto] 2.5.25PCH Voltage [Auto] 2.5.26DRAM CTRL REF Voltage [Auto] 2.5.27DRAM DATA REF Voltage on CHA [Auto] 2.5.28DRAM DATA REF Voltage on CHB [Auto] 2.6.1CPU Configuration Intel® Adaptive Thermal Monitor [Enabled] Hyper-threading[Enabled] Active Processor Cores [All] Limit CPUID Maximum [Disabled] Execute Disable Bit [Enabled] Intel® Virtualization Technology [Disabled] Hardware Prefetcher [Enabled] Adjacent Cache Line Prefetch [Enabled] Boot performance mode [Max Non-Tu...] 2.6.2PCH Configuration PCI Express Configuration Intel® Rapid Start Technology Intel® Smart Connect Technology [Disabled] 2.6.3SATA Configuration SATA Mode Selection [AHCI] Aggressive LPM Support [Disabled] IDE Legacy / Native Mode Selection [Native] S.M.A.R.T. Status Check [Enabled] 2.6.4System Agent Configuration CPU Audio Device [Disabled] DVI Port Audio [Disabled] Graphics Configuration DMI Configuration 2.6.5AMT Configuration Intel® AMT [Enabled] BIOS Hotkey Pressed [Disabled] Un-ConfigureME [Disabled] 2.6.6USB Configuration 2.6.7Platform Misc Configuration PCI Express Native Power Management [Disabled] Native ASPM [Disabled] 2.6.8Onboard Devices Configuration HD Audio Controller [Enabled] 2.6.9APM Deep S4 [Disabled] Restore AC Power Loss [Power Off] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Mouse [Disabled] 2.6.10Network Stack Network Stack [Disabled] Ipv4 PXE Support [Enabled] Ipv6 PXE Support [Enabled] 2.7.1CPU Temperature [xxxºC/xxxºF] 2.7.2CPU / Chassis Fan1/2 Speed [xxxx RPM] or [Ignore] / [N/A] 2.7.3CPU Input Voltage (VCCIN), 3.3V Voltage, 5V Voltage, 12V Voltage 2.7.4CPU Q-FanControl [Enabled] CPU Fan Speed Low Limit [200 RPM] CPU Fan Profile [Standard] 2.7.5Chassis1/2 Q-FanControl [Enabled] Chassis1/2 Fan Speed Low Limit [600 RPM] 2.7.6Anti Surge Support [Enabled] 2.8.1Fast Boot [Enabled] USB Support [Partial Initialization] PS/2 Keyboard and Mouse Support [Auto] Network Stack Driver Support [Disabled] Next Boot after AC Power Loss [Normal Boot] 2.8.2Boot Logo Display [Enabled] Boot Logo Size Control [Auto] POST Delay Time [3 sec] Post Report [5 sec] 2.8.3Bootup NumLock State [On] 2.8.4Wait for ‘F1’ If Error [Enabled] 2.8.5Option ROM Messages [Force BIOS] 2.8.6Interrupt 19 Capture [Disabled] 2.8.7Setup Mode [EZ Mode] 2.8.8CSM (Compatibility Support Module) 2.8.9Secure Boot OS Type [Windows UE...] Key Management KEK Management Delete the KEK Load KEK from File Append KEK from file DB Management 2.8.10Boot Option Priorities 2.8.11Boot Override 2.9.1ASUS EZ Flash 2 Utility 2.9.2ASUS O.C. Profile Save to Profile Load from Profile 2.9.3ASUS SPD Information Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS EZ Mode Launch EFI Shell from filesystem device Federal Communications Commission Statement IC: Canadian Compliance Statement Canadian Department of Communications Statement VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea Warning Statement REACH ASUSTeK COMPUTER INC ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Germany and Austria) DECLARATION OF CONFORMITY EC Declaration of Conformity