The following two items appear only when you set the CPU Core Ratio to [Sync All
Cores] or [Per Core].
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a
These items become configurable only when you set the CPU Core Ratio item to [Per Core].
2.5.4Min CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible minimum value. Configuration options: [Auto] [1] ~ [30].
2.5.5Max CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible maximum value. Configuration options: [Auto] [1] ~ [30].
2.5.6CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto] | DRAM speed is set to the optimized settings. |
[100:133] | The CPU bus speed to DRAM speed ratio is set to 100:133. |
[100:100] | The CPU bus speed to DRAM speed ratio is set to 100:100. |
2.5.7Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the BCLK/PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become unstable! If this happens, revert to the default setting.
2.5.8CPU Graphics Max. Ratio [Auto]
[Auto] | The CPU Graphics Max. ratio is set to its optimized setting depending on |
| the system loading. |
[Manaul] | Use the <+> or |
| The value may vary depending on the system loading. |
2.5.9GPU Boost [As is]
Allows you to enable the GPU Boost to accelerate the integrated GPU for extreme graphics performance. Configuration options: [As is] [Enabled].
2.5.10EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function. Configuration options: [Disabled] [Enabled]
Chapter 2: Getting started |