Post Delay Time [3 sec]

This item appears only when the Full Screen Logo item is set to [Enabled] and allows you to set the Post Delay Time. Configuration options: [0 sec] [1 sec] ~ [10 sec].

2.7.3Bootup NumLock State [On]

[On]

Sets the power-on state of the NumLock to [On].

[Off]

Sets the power-on state of the NumLock to [Off].

2.7.4Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

2.7.5Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be forced to display during the boot

 

sequence.

[Keep Current]

The third-party ROM messages will be displayed only if the third-party

 

manufacturer had set the add-on device to do so.

2.7.6Setup Mode [EZ Mode]

[Advanced Mode]

Sets Advanced Mode as the default screen for entering the BIOS setup

 

program.

[EZ Mode]

Sets EZ Mode as the default screen for entering the BIOS setup program.

2.7.7CSM (Compatibility Support Module)

This option allows you to control the CSM (Compatibility Support Module) launch parmeters.

Launch CSM [Enabled]

Configuration option: [Auto] [Enabled] [Disabled]

The following four items appear when Launch CSM is set to [Enabled].

Boot Device Control [UEFI and L...]

Configuration option: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]

Boot from Network Devices [Legacy OpR...]

Configuration option: [Legacy OpROM first] [UEFI driver first] [Ignore]

Boot from Storage Devices [Legacy OpR...]

Configuration option: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first] [UEFI driver first] [Ignore]

Boot from PCIe Expansion Devices [Legacy OpR...] Configuration option: [Legacy OpROM first] [UEFI driver first]

ASUS C8HM70-I Series

2-25