HARDWARE SETUP

The following PANEL illustration is for items 8-11.

 

+PLED

PWR

 

Power LED

-PLED

Ground ATX Power Switch*

HD LED

+HDLED

Reset

Reset SW

-HDLED

Ground

 

 

* Requires an ATX power supply.

CUV4X-CME

CUV4X-CME System Panel Connectors

8)System Power LED Connector(2-pin PWRLED)

This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep or soft-off mode.

9)Hard Disk LED Connector (2-pin HDLED)

This 2-pin connector is for the hard disk LED. This LED blinks during hard disk operation.

10)ATX Power Switch Connector (2-pin PWR)

The system power is controlled by a momentary switch attached to this connector.

11)Reset Switch Connector (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the power switch. This is a preferred method

Connectors

H/W SETUP

ASUS CUV4X-CME User’s Manual

11