3.HARDWARE SETUP
3.2Layout Contents
Motherboard Settings |
|
| |
1) | JEN | p.18 | JumperFree™ Mode (Enable/Disable) |
2) | VIO | p.18 | I/O Voltage Setting (Normal/+3.66V) |
3) | CODEC | p.19 | Onboard Audio Codec Setting (Enable/Disable) |
4) | PCI3VSEL | p.20 | PCI 3Volt Setting (Enable 3 VSB/Disable 3 VSB) |
5) | SAFE_MD | p.20 | Safe Mode (Enable/Disable) |
6) | NO_REBOOT | p.21 | Automatic Timeout Reboot (Enable/Disable) |
7) | DSW | p.22 | CPU External Clock Frequency Setting |
1) | DIMM1, DIMM2, DIMM3 | p.25 | |
2) | Socket 370 | p.26 | Central Processing Unit (CPU) Socket |
4) | PCI1, PCI2, PCI3 | p.29 | |
5) | AMR | p.30 | Audio Modem Riser Slot |
1) | PS2KBMS | p.31 | PS/2 Mouse Connector |
2) | PS2KBMS | p.31 | PS/2 Keyboard Connector |
3) | USB | p.32 | Universal Serial Bus Ports 1 & 2 (Two |
4) | PRINTER | p.32 | Parallel Port Connector |
5) | COM1 | p.32 | Serial Port COM1 Connector |
6) | VGA | p.33 | Monitor (VGA) Output Connector |
7) | GAME_AUDIO | p.33 | Joystick/MIDI Connector |
8) | GAME_AUDIO | p.33 | Audio Port Connectors (Three 1/8” female) |
9) | PRIMARY/SECONDARY | p.34 | Primary/Secondary IDE Connectors (Two |
10) | FLOPPY | p.34 | Floppy Disk Drive Connector |
11) | WOL_CON | p.35 | |
12) | WOR | p.35 | |
13) | IDELED | p.36 | IDE Activity LED Lead (2 pins) |
14) | CHA_, CPU_, PWR_FAN | p.36 | Chassis, CPU, Power Supply Fan Connectors (Three |
15) | IR_CON | p.37 | Infrared Module Connectors |
16) | COM2 | p.37 | Serial Port COM2 Header |
17) | SMB | p.38 | SMBus Connector |
18) | LCDTV0/LCDTV1 | p.38 | |
19) | TAD, AUX, VIDEO, CD | p.39 | Internal Audio Connectors (Four |
20) | MIC2 | p.39 | Internal Microphone Connector (3 pins) |
21) | ACHA | p.40 | Chassis Intrusion Lead |
22) | ATXPWR | p.40 | ATX Power Supply Connector (20 pins) |
Layout Contents
3. H/W SETUPASUS | 15 |