Firmware Restoration is used on an ASUS Wireless ADSL Router that failed during its firmware upgrading process. It uploads the firmware that you specify. The process takes about three to four minutes.
Important: Launch the rescue mode before using the Firmware Restoration utility.
To launch the rescue mode and use the Firmware Restoration utility:
1.Unplug the wireless router from the power source.
2.Hold the Restore button at the rear panel and simultaneously
Power LED at the front panel flashes slowly, which indicates that the wireless router is in the rescue mode.
3.From your computer’s desktop, click Start > All Programs > ASUS Utility >
4. Specify a firmware file, then click Upload.
Note: This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless ADSL Router. Normal firmware upgrades must be done through the web interface. Refer to Chapter 4: Configuring via the web GUI for more details.
Chapter 5: Installing the utilities | 29 |