1Power LED Off: No power. On: Device is ready.

Flashing slow: Rescue mode

Flashing quick: WPS is processing.

2ADSL LED

Solid light: ADSL link is established.

Flashing: No ADSL link or unable to establish ADSL link.

3WAN LED

Off: No power or no physical connection.

On: Has physical connection to a wide area network (WAN).

4LAN LED

Off: No power or no physical connection.

On: Has physical connection to a local area network (LAN).

5Wi-Fi LED

Off: No Wi-Fi signal.

On: Wireless system is ready.

Flashing: Transmitting or receiving data via wireless connection.

6Reset button

This button resets or restores the system to its factory default settings.

7Power (DC-In) port

Insert the bundled AC adapter into this port and connect your router to a power source.

8Power switch

Press this button to turn the power on/off.

9USB 2.0 / USB 1.1 port

Insert a USB 2.0/USB 1.1 device such as USB hard disks or USB flash drives into this port.

Insert your iPad’s USB cable into this port to charge your iPad.

Insert your printer’s USB cable into one of these ports to set up your network printer. For details, refer to the section Setting up your network printer.

10LAN 1 ~ 4 ports

Connect network cables into these ports to establish LAN connection.

11WPS button

This button launches the WPS Push Button Configuration process.

12Wi-Fi switch

Switch to turn the WiFi feature on/off.

13ADSL port

Connect to a splitter or to a telephone outlet via an RJ-11 cable.