4 Using the Notebook PC

Inserting a PC Card or ExpressCard

1

Be sure the PC card is

 

level when inserting.

1.If there is a PC Card socket protector, remove it using the “Removing a PC Card” instructions below.

2.Insert the PC card with the connector side first and label side up. Standard PC cards will be flush with the Notebook PC when fully inserted.

2

3.Carefully connect any cables or adapters needed by the PC card. Usually connectors can only be inserted in one orientation. Look for a sticker, icon, or marking on one side of the con- nector representing the top side.

Removing a PC Card

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the PC card icon on the Windows taskbar and stop the PC card you want to remove.

1.Press in the toggle eject button and release. The recessed spring loaded toggle button will extend when pushed in and released.

2.Press the extended button again to eject the PC Card. Carefully pull the ejected PC card out of the socket.

3

5

4

Removing an ExpressCard

The ExpressCard slot does not have an eject button. Remove the ExpressCard like a memory card. Press the ExpressCard inwards and release to eject the ExpressCard.

44