6.System panel connector (20-8 pin PANEL)

This connector supports several chassis-mounted functions.

 

PLED

 

SPEAKER

PLED+

 

+5V Ground Ground Speaker

PLED-

PANEL

PIN 1

E45M1-M PRO

IDE LED+ IDE LED-

 

PWR Ground

 

Reset Ground

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IDE_LED

 

PWRSW

 

RESET

* Requires an ATX power supply

E45M1-M PRO System panel connector•System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin IDE_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.

•System warning speaker (4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.

•ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

7.LPT connector (26-1 pin LPT)

The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers.

E45M1-M PRO

LPT AFD ERR# INIT# SLIN# GND GND GND GND GND GND GND GND

1PINSTB#PD0PD1PD2PD3PD4PD5PD6PD7ACK#BUSYPESLCT

E45M1-M PRO LPT connector

Chapter 1: Product introduction

1-17