This procedure allows you to delete the Intel® Rapid Start Technology from your system, and recover the partition you made for the Intel Rapid® Start Technology installation.
1.Run the Command Prompt tool.
2.Type diskpart and press Enter.
3.At the diskpart prompt, type list disk after DISKPART, and press
Enter.
4.Select the disk (SSD) where the Intel® Rapid Start Technology
is installed for volume recovery, type select disk x (x = number), and press Enter.
The value“x”refers to a disk number where you want to delete the store partition.
5.Type list partition, press Enter, and select the partition where the Intel Rapid Start Technology is installed
by typing select partition x (x=number), and press Enter.
The value“x”refers to a disk number where you want to delete the store partition.
Notebook PC User Manual |