Security Setting

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main���� Advanced�������� Boot���� Security Save & Exit

Password Description

If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.

If ONLY the user’s password is set, then this

is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.

Set the system boot order.

Administrator Password

NOT INSTALLED

User Password Status

NOT INSTALLED

Setup administrator password

 

User Password

 

HDD Password Status :

NOT INSTALLED

Set Master Password

 

Set User Password

 

I/O Interface Security

 

:

Select Screen

:

Select Item

Enter: Select

+/—: Change Opt.

F1:

General Help

F2:

Previous Values

F9:

Optimized Defaults

F10:

Save ESC: Exit

Version 2.01.1208. Copyright (C) 2010 American Megatrends, Inc.

To set the password:

1.On the Security screen, select Setup Administrator Password or User Password.

2.Type in a password and press [Enter].

3.Re-type to confirm the password and press [Enter].

4.Password is then set.

To clear the password:

1.On the Security screen, select Setup Administrator Password or User Password.

2.Enter the current password and press [Enter].

3.Leave the Create New Password field blank and press [Enter].

4.Leave the Confirm New Password field blank and press [Enter].

5.Password is then cleared.

You will be asked to enter the User Password whenever you power on the Notebook PC (enter BIOS or OS).The Administrator Password is only asked when you would like to enter and configure the BIOS settings.

Notebook PC User Manual

A-5