
6.USB 2.0 connectors
These connectors are for USB 2.0 ports. Connect these connectors, then install the module to a slot chassis. These USB connectors comply with USB
480Mbps connection speed.
the USB module cable to any of opening at the back of the system 2.0 specification that supports up to
USB78 USB56
USB+5V USB P8- USB P8+ | GND NC | USB+5V USB P6- USB P6+ | GND NC | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PIN 1 |
|
|
|
|
|
| PIN 1 |
|
|
|
|
|
USB+5V USB P7- USB P7+ | GND | USB+5V USB P5- USB P5+ | GND |
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
7.CPU and chassis fan connectorsConnect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
CHA_FAN
GND
+12V
Rotation
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.
Only the
Chapter 1: Product introduction |