CPU Internal Power Fault Control
Thermal Feedback [Auto]
Allows the CPU to take precautionary actions when the thermal conditions of the external regulator exceeds the threshold.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto] |
|
Allows you to prevent tripping the Fully Integrated Voltage Regulator when |
|
doing |
|
We recommend to set this item to [Disable] when overclocking. |
|
CPU Internal Power Configuration |
|
CPU Integrated VR Efficiency Management [Auto] |
|
Allows you to improve power saving when the processor is in low power |
|
state. Disable this item to make the Fully Integrated Voltage Regulator work |
|
in high performance at all times. |
|
Configuration options: [Auto] [High Performance] [Balanced] |
|
Power Decay Mode [Auto] |
|
Allows you to enable this item to improve the power saving on the Fully |
|
Integrated Voltage Regulator as the processor goes into low current state. |
|
Configuration options: [Auto] [Disabled] [Enabled] |
|
Idle |
|
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as |
|
it enters manual override mode. |
|
Configuration options: [Auto] [Regular] [Fast] |
|
Idle |
|
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as |
|
it exits manual override mode. |
|
Configuration options: [Auto] [Regular] [Fast] |
|
Power Current Slope [Auto] |
|
Allows you to adjust the gradient of the |
|
balance during load transients to eliminate current imbalance, resulting |
|
from a load current oscillating near the switching frequency. |
|
Configuration options: [Auto] [LEVEL |
|
Power Current Offset [Auto] |
|
Allows you to increase or decrease the output current sensed by the CPU. |
|
It finds the balance between optimal regulating while staying below the |
|
current threshold. |
|
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] |
|
[37.5%] [25.0%] [12.5%] [0%] | 3 |
Chapter | |
|
ASUS MAXIMUS VI HERO |